Nuto H Series
Premium Quality Anti-wear Hydraulic Oils
Product Description
Nuto H Series oils are premium quality anti-wear hydraulic oils intended for
industrial and mobile service applications where anti-wear lubricants are
required. They are formulated with high quality base oils and a select additive
system that results in products that provide many desirable features to improve
and prolong equipment life. Nuto H Series oils are designed to provide good
performance in a range of hydraulic components used in systems subjected to
moderate to severe operating conditions. These products meet the performance
requirements of a wide range of hydraulic system and component OEM's.
Features and Benefits
The Nuto H Series hydraulic oils help reduce the potential for wear and
corrosion, particularly where water or moisture is present. Their effective
oxidation resistance and chemical stability support good oil life in moderate to
severe applications. Their high level of anti-wear properties prevents wear in
vane, gear and piston pumps used in hydraulic service. Their good demulsibility
characteristics permit the oils to work well in systems contaminated with small
amounts of water yet readily separate large amounts of water.
The Nuto H Series oils offer the following features:
Good anti-wear performance reducing pump wear and leading to long pump life
Fast air release, good foam control and good water separability
Corrosion protection that reduces the negative effects of moisture on system
components
Filterability to prevent filter blockage even in the presence of water
Effective oxidation and chemical stability characteristics allows good oil
and filter life
Applications
Systems employing gear, vane, radial and axial piston pumps where anti-wear
hydraulic oils are recommended
Hydraulic applications where contamination or leakage are unavoidable
Where small amounts of water are unavoidable and this water could damage
components
Systems containing gears and bearings where mild anti-wear characteristics
are required
Applications where thin oil-film corrosion protection is an asset such as
systems where small amounts of water exist
Specifications and Approvals
| Nuto H Series meets or exceeds the requirements of: | Nuto H 32 | Nuto H 46 | Nuto H 68 | Nuto H 100 | Nuto H 150 |
|---|
| DIN 51524-2 2006-09 | X | X | X | X |
|
| ISO 11158 TYPE HM (1997) | X | X | X | X | X |
| Nuto H Series has the following builder approvals | Nuto H 32 | Nuto H 46 | Nuto H 68 | Nuto H 100 | Nuto H 150 |
|---|
| Denison HF-0 | X | X | X |
|
|
| Cincinnati Machine P-68 | X |
|
|
|
|
| Cincinnati Machine P-69 |
|
| X |
|
|
| Cincinnati Machine P-70 |
| X |
|
|
|
| Vickers I-286-S | X | X | X |
|
|
| Vickers M-2950-S | X | X | X |
|
|
Typical Properties
| Nuto H Series | Nuto H 32 | Nuto H 46 | Nuto H 68 | Nuto H 100 | Nuto H 150 |
|---|
| ISO Viscosity Grade | 32 | 46 | 68 | 100 | 150 |
| Viscosity, ASTM D 445, |
|
|
|
|
|
| cSt @ 40oC | 32 | 46 | 68 | 100 | 150 |
| cSt @ 100oC | 5.4 | 6.7 | 8.5 | 11.1 | 14.6 |
| Viscosity Index, ASTM D 2270 | 104 | 104 | 107 | 95 | 95 |
| Copper Strip Corrosion, ASTM D 130 | 1A | 1A | 1A | 1A | 1A |
| Rust Characteristics, ASTM D 665B | Pass | Pass | Pass | Pass | Pass |
| Pour Point, oC, ASTM D 97 | -24 | -24 | -18 | -15 | -18 |
| Flash Point, oC, ASTM D 92 | 212 | 226 | 234 | 242 | 258 |
| Density 15oC, ASTM D 1298, kg/L | 0.872 | 0.876 | 0.882 | 0.884 | 0.887 |
| Demulsibility time (minutes) to 3ml emulsion; |
|
|
|
|
|
| @ 54oC | 15 | 15 | 20 | - | - |
| @ 82oC | - | - | - | 10 | 5 |
Health and Safety
Based on available information, this product is not expected to produce
adverse effects on health when used for the intended application and the
recommendations provided in the Material Safety Data Sheet (MSDS) are followed.
MSDS's are available upon request through your sales contract office, or via the
Internet. This product should not be used for purposes other than its intended
use. If disposing of used product, take care to protect the environment.
